地勘单位转制后税务风险识别与控制

结合“减税降费”的政策背景,以陕西省某转制地勘单位为例,引入风险控制相关理论并应用层次分析法,构建了税务风险评估指标体系,对转制地勘单位面临的税务风险进行了识别、分析、评估。研究结果表明:针对不同的税收类型,应着重关注不同方面的风险,排序前6位的风险依次为企业所得税扣除类风险、增值税决策环节风险、增值税销售环节风险、房产税计税依据风险、企业所得税税收优惠类风险、增值税采购环节风险;并对上述风险的控制机制进行了分析,从企业管控、政策优化两方面分别提出了相关对策和建议。     

高含硫气田集输系统增压模式优化研究

随着高含硫气田的持续开发,气井井口压力逐步低于集输压力,亟需实施集输系统增压运行。采用OLGA软件,以气液两相流、压降预测、耦合传热理论为基础,针对高含硫气田集输管网高程差、气体组分、液气比、管网全尺寸参数等工况条件,建立了复杂山地高含硫湿气集输系统生产运行的数值模型,以集输系统生产历史数据为基础,验证模型准确性并进行修正。考虑单井、多井或单线配置压缩机等情况,根据开发预测的各井压力变化情况,计算集输管网的压力分布及系统能耗,重点分析了单站增压、区域+单站增压、集输干线增压三种模式,最终优选出高含硫气田集输系统增压模式。     

含V型相交裂隙岩体的力学特性及破坏模式试验

为深入了解V型相交裂隙岩体试件的力学特性和裂纹演化规律,采用MTS815电液伺服控制试验机对含不同夹角V型相交裂隙岩体试件进行了常规单轴压缩试验,基于试验结果,详细分析了试件的应力-应变曲线、强度与变形特性、裂纹演化与破坏模式及能量耗散特征。研究结果表明:①裂隙试件的应力-应变曲线进入裂纹萌生与扩展阶段早于完整试件,在峰前出现了明显的应力降现象,在峰后破坏阶段,完整试件表现为应力-应变曲线的快速跌落,而裂隙试件呈现台阶状多阶段性跌落,甚至缓慢水平下降,体现出明显的延性破坏特征;②裂隙试件的峰值应力、弹性模量和峰值应变均有明显减小。峰值强度和弹性模量随裂隙夹角的增加呈先增大后减小的变化趋势。轴向峰值应变主要受裂隙夹角的影响,总体随夹角的增大呈线性减小的趋势;③裂隙的存在能够完全改变岩体试件的破坏模式,随着裂隙夹角的逐渐增加,裂隙试件破坏模式的演化过程为:台阶式张拉-剪切复合破坏(30°)→张拉-八字形剪切复合破坏(60°)→台阶式平行双斜面剪切破坏(90°)。当裂隙夹角为60°时,试件的裂纹演化和破坏模式体现出对加载方向近似的结构对称性特征;④相交裂隙试件单轴压缩破坏的弹性应变能、耗散能、总能量和能量耗散率均较完整试件有大幅度的减小。裂隙试件产生的裂纹数量越多,试件表面的脱落现象越明显,耗散能和能量耗散率也越大。拉-剪复合破坏比单纯剪切破坏要消耗更多的能量。试件的破坏特征和破坏模式能很好地反映试件的能量耗散特性。     

Asynchronous control for two‐dimensional hidden Markovian jump systems with partly known mode observation conditional probabilities

This study focuses on the asynchronous control problem for two‐dimensional discrete‐time hidden Markovian jump systems where the mode observation conditional probability matrix is partly known. Considering the original system modes are invisible, the observed modes emitted from an observer serve as an alternative for stability analysis and controller design where a mode observation conditional probability matrix is constructed to characterize the emission between system modes and observed modes. Specially, only partly known information of the mode observation conditional probability matrix is accessible. With the introduction of the free‐connection weighting matrices, the asymptotic mean square stability criterion is firstly derived based on Lyapunov method. This introduction provides a further degree of relaxation and less conservatism is therefore achieved. Secondly, we present synthesis conditions for asynchronous state feedback controller design given in terms of a set of interconnected linear matrix inequalities. Moreover, cluster concept based on the partitions of observed modes is adopted which helps to decrease the number of controllers and simplify the design complexity. A numerical example, regarding the cases with and without clustering of the observed modes, is presented to illustrate the effectiveness of the proposed method.     

鲸鱼优化支持向量机的短期风电功率预测

为提高风电预测的精度,提出一种鲸鱼优化支持向量机SVM(support vector machine)的组合预测模型。该模型针对风电序列的非平稳波动特性,首先应用集合经验模态分解技术EEMD(ensemble empirical mode de?composition)将原始风电序列分解为一系列不同特征尺度的子序列;并引入鲸鱼优化算法WOA(whales optimiza?tion algorithm)解决SVM中学习参数选择难的问题,进而对各子序列建立WOA_SVM预测模型;最后,叠加各子序列的预测值以得到最终预测值。仿真表明,所提EEMD_WOA_SVM模型具有较高的风电预测精度,显著优于其他基本模型。     

机加工孔套管抗挤压强度有限元分析

套管屈服强度直接影响套管抗挤压性能，套管在加工孔过程中可能诱发孔眼附近材料发生金属相变，导致套管屈服强度不再均匀分布，进而影响套管抗挤压强度。在相同工况下，对比了P110完整套管和机加工孔套管的抗挤压强度，以此为参照组分析了相变区域面积和相变区域屈服强度对机加工孔套管抗挤压强度的影响。结果表明，机加工孔会改变材料屈服强度，进而影响套管抗挤压性能。随金属相变区域屈服强度减小，机加工孔套管抗挤压强度减弱；当金属相变区域屈服强度增大时，机加工孔套管抗挤压强度增强。且机加工孔套管相变区域面积对机加工孔套管抗挤压强度的影响随相变区域屈服强度增加而逐渐削弱。     

QC小组活动原因分析要点

在开展问题解决型质量管理小组活动中,原因分析不可或缺。要分析到问题的末端原因,须展示问题的全貌,从人、机、料、法、环、测,从全面到重点,从综合到局部,分析到可以直接采取对策的因素为止。掌握原因分析的技巧和要点,有效采取头脑风暴法、5why分析法、5M1E分析环节,正确使用因果图、系统图、关联图,一定能够达到事半功倍的效果。     

Asynchronous adaptive output feedback sliding mode control for Takagi-Sugeno fuzzy Markovian jump systems with actuator faults

In this article, the problem of asynchronous adaptive dynamic output feedback sliding mode control (SMC) for a class of Takagi-Sugeno (T-S) fuzzy Markovian jump systems (MJSs) with actuator faults is investigated. The asynchronous dynamic output feedback control strategy is employed, as the nonsynchronization phenomenon of jump modes exists between the plant and the controller. A novel asynchronous adaptive SMC approach is proposed to solve the synthesis problem for T-S fuzzy MJSs with actuator faults. Sufficient conditions for stochastic asymptotic stability of T-S fuzzy MJSs are given. Under the designed asynchronous adaptive SMC scheme, the effects of actuator faults and external disturbance can be completely compensated and the reachability of sliding surface is ensured. Finally, an example is provided to demonstrate the effectiveness of the proposed design techniques.     

How to choose endothermic process for thermochemical waste-heat recuperation?

The thermochemical waste-heat recuperation (TCR) systems by steam reforming of various hydrocarbon fuels are considered. A method for determining the TCR systems efficiency is proposed. The methodology is based on the determination of the heat recuperation rate and heat transformation coefficient. TCR due to steam reforming of methanol, ethanol, glycerol, propane, and methane was analyzed. To obtain the initial data for energy analysis of TCR systems, the thermodynamic analysis was performed. With the help of Aspen HYSYS was determined the synthesis gas composition and reaction enthalpy for all investigated variants. The investigation was performed for a wide temperature range from 400 to 1200 K, for the steam-to-fuel ratio of 1, and pressures of 1 bar. It was established that TCR due to the steam reforming of ethanol, glycerol, and propane in the temperature range above 800 K, it is possible to achieve complete recuperation of the exhaust after the furnace. As a results of investigation, the practical recommendations were given for choosing endothermic reaction for the thermochemical waste-heat recuperation systems: in the temperature range up to 600 K for TCR it is necessary to choose a methanol steam reforming reaction; in the temperature range from 600 to 1000 K - the reaction of steam reforming of ethanol and glycerol; in the temperature range above 1000 K - the reaction of steam reforming propane and methane.     

基于萤石溶解/表面转化的含钙矿物表面定向调控浮选技术及机理研究

研究了萤石在白钨矿和方解石表面溶解和转化的可能性, 发现萤石可以在特定的捕收剂体系下作为抑制剂实现含钙矿物的浮选分离。浮选实验结果表明, 萤石作为抑制剂, 在白钨矿和方解石的浮选中, 用量小、作用效果明显; 动电位检测结果证实了萤石能明显降低方解石的动电位, 但对白钨矿基本没有影响; XPS检测结果证明了萤石对方解石的作用主要在于对Ca-O键能的减弱和Ca-F基团的生成, 即在方解石表面生成CaF2膜; AFM检测则可直观观察到方解石表面经过萤石处理之后出现明显的起伏, 印证了离子的侵蚀与CaF₂膜的生成。